Galaxy H7920 Mobile Router User Manual | Chapter 2: Installation |
A valid GPRS/EDGE SIM card or CDMA 1X UIM card (Depends router type)
Galaxy router should be placed on desktop, wall or any other fixed place. There is no special requirement for wiring and heating dispersion. However, it is required to place Galaxy router apart from:
Heating device
Dusty and moist environments
Interference source, such as metal wall, microwave oven
The antenna should be installed at correct place and angle to ensure the GPRS/EDGE or CDMA 1x signal receiving. Do not install antenna inside of metal cabinet.
Measurement
The below diagram is Galaxy router outside and installation measurement.
10M LINK NET RUN
宏电
Hongdian
Galaxy
CDMA 1x路由器
深圳市宏电技术开发有限公司
Shenzhen Hongdian Technologies Co., Ltd.
http://www.hongdian.com
Made in Shenzhen, China
ANT RESET | DC | RJ45 | COM |
Galaxy H7920 Mobile Router User Manual | Chapter 2: Installation |
Panels
Front Panel
Galaxy H7920 Router Front Panel
LED description:
10M: 10BaseT LED, lights up when connected with 10M link.
LINK: LAN LED, lights up when connected.
NET: Radio network LED, blinking during login, lights up when logged in (Depends network, check the definitions at Online Help).
RUN: Galaxy router LED, blinking means normal operation.
The SIM or UIM card can be inserted and released by pressing the SIM/UIM card drawer button.
Rear Panel
All Galaxy router connectors are located at the rear panel.
Galaxy Router Rear Panel
9 | 10 |