Configuration Profile

Galaxy H7920 Mobile Router User Manual	Chapter 3: Router Configuration		Galaxy H7920 Mobile Router User Manual	Chapter 3: Router Configuration

With the built-in with real time clock function, GALAXY router will be automatically synchronized with clock sources when it is powered on.

For CDMA version, Galaxy router will be locked at CDAM network clock source.

For GPRS/EDGE version, Galaxy router will be synchronized to an Internet clock source (NTP) when it has been connected to GPRS/EDGE network. There is an option to enable or disable NTP client; and also the NTP server can be specified accordingly.

When the clock is synchronized to an Internet clock source, there is a drop list to select the time zone accordingly. Also there is an option to enable or disable NTP client; and also the NTP server can be specified accordingly.

Press "Synch" button to synchronize the router manually.

Once router restarts, the clock may be reset to the initial time and then re-synchronize after the GPRS/EDGE network is connected.

Click "Start"->"System Tools"->"Configuration Profile" menu to start this setup page.

Press "Backup Configuration Profile" button to backup and store router configuration profile in PC. Then, the original configurations stored in PC can be retrieved. Press "Default Setting" button to restore router to default factory setting.

System Information

Click "Start"->"System Tools"->"System Information" menu to start this page.

There are reference information for router software upgrading and maintenance. The page displays router type, hardware and software version, RF module type and series number, router series number and so on.

M80-792001-01