Shenzhen High Power Tech H7920 user manual Route Configuration, Dynamic DNS

Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration

SNMP: Enable or Disable, tick it to enable the SNMP function. It supports SNMP V1 and V2C (V3 ready) automatically.

Set Community: Set the community name, such as "public".

IP: Set the SNMP management IP address. Usually, it is the router LAN interface IP address.

System Name: Set the router name that will display on the NMS.

System Contact: Set the router contact name.

System Location: Set the router location.

It may be required to save all settings and restart the router to affect it.

Dynamic DNS

As you know, there are many DNS server at Internet; it records and translates the domain name into corresponding IP address. However, normal DNS server only maps the domain name and static IP address.

Dynamic DNS service will map the specified domain name to a dynamic IP address. With the built-in client in Galaxy router, the dynamic IP address assigned by mobile network and the domain name applied from dynamic DNS service provider will be registered at Dynamic DNS server when the Galaxy router is connected. Meanwhile, the built-in client will update the operation information at the interval defined by the dynamic DNS server.

Click "Start"->"Network Setting"->"Dynamic DNS" menu to start this setup page.

Before enabling the dynamic DNS function, you should apply a valid account from a service provider in the drop list. Input the following information.

Service Provider

Host Name

User ID/E-Mail

Password/Key

You can get the information from dynamic DNS service provider after successful application.

Dynamic DNS service provider list will be added or deleted accordingly.

3.2.5 Route Configuration

Click “Start” > "Route Configuration", the below picture will be displayed.

There are three sub-menus at "Route Configuration".

M80-792001-01 33 M80-792001-01 34