Shenzhen High Power Tech H7920 user manual Router Status, Online Help, Console Mode

Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration

Console Mode

The Galaxy router RS-232 interface can configured for a data communication port or a Console port. The Console port is only used for factory testing and trouble shooting.

3.2.1 Router Status

Click "Start"->"Router Status" menu, you will find Galaxy router operation main information including settings and inbound/outbound data traffic.

Galaxy H7920 Mobile Router User Manual Chapter 3: Router Configuration

RF Signal: It displays Galaxy router received GPRS/EDGE or CDMA RF signal strength in dBm unit. If the received RF signal is lower than -80dBm, it displays the RF strength with "BAD" word.

Router ID: It is the router's unique identity name for industries and utilities application. Click "Start">"Special Setting">"DTU Setting" to modify it.

"Data Traffic" displays Galaxy router inbound/outbound data packets and also displays packets type and errors.

Packets = Broadcasting Packets + Non-Broadcasting Packets + Loss + Error

Dial Info

Click this button to open detail dial info page:

Start module check. Module checks OK. Card ready.

CSQ: 026, 0.

Start dialing

Serial connection established. Using channel 1

Using interface ppp0

Connect: ppp0 <--> /dev/ttyS1 Remote message:

Local IP address 10.103.32.97 Remote IP address 192.168.100.101 Thu Jan 18 00:00:30 2005

(Note: assigned by mobile operator)

(Note: it is the mobile network server peer address)

This page will display the information:

Mobile Network IP: It is an IP address assigned automatically by GPRS/EDGE or CDMA 1x network. Normally, it is a dynamic IP address unless it is bound with the SIM or UIM card.

Mobile Network IP: It is an IP address assigned automatically by GPRS/EDGE or CDMA 1x network. Normally, it is a dynamic IP address unless it is bound with the SIM or UIM card.

Mobile Network Subnet: It is a subnet assigned by GPRS/EDGE or CDMA 1x network.

Peer to Peer IP: It is GPRS/EDGE or CDMA 1x network peer IP address.

DNS: It is setting parameters at the page DHCP Configuration. Access it by clicking "Start">"Network Setting">"DHCP Configuration". Access Point Name: It is APN parameters set at the page of Network Setting. Access it by clicking "Start">"Network Setting">"Network Setting".

PPPStatus: It displays GPRS/EDGE or CDMA 1x connection online or offline status and displays online period if the router is connecting with network. For GPRS/EDGE version, since the clock is synchronized to an Internet clock sources after connected to GPRS/EDGE network. Therefore, the online period displayed on this page may be not correct at the first dial-up.

M80-792001-01 21

It is a useful tool to check detail dial-up information. Select this option if the router is unable to dial network, and send the dial-up information to Hongdian for trouble shooting.

To have more dial-up information, tick the "Dialup Debug Info." at the page of "PPP Advanced Setting".

(Access it by clicking "Start">"Network Setting">"Network Basic Setting", and then click the “PPP Advanced Setting”)

3.2.2 Online Help

Click “Start”->"Online Help", a new windows will be opened, and the below webpage picture appears.

M80-792001-01 22