Multi-Tech Systems MVP-2400, MVP-2410 Analog MultiVOIPs, Digital MultiVOIPs, ISDN-BRI MultiVOIPs

Quick Start Instructions MultiVOIP User Guide

Once you’ve begun using the web browser GUI, you can go back to the MultiVOIP Windows GUI at any time. However, you must log out of the web browser GUI before using the MultiVOIP Windows GUI.

5.Go to Configuration Voice/Fax. Select Coder “Automatic.” At the right-hand side of the dialog box, click Default. If you know any specific parameter values that will apply to your system, enter them. Click Copy Channel. Select Copy to All. Click Copy. At main Voice/Fax Parameters screen, click OK to exit from the dialog box.

6.Enter telephone system information.

Analog MultiVOIPs

MVP130,

MVP-210/410/810

MVP-210G/410G/810G

Go to

Configuration Interface. Enter parameters obtained from phone company or PBX administrator.

Digital MultiVOIPs

MVP-2400/2410x/3010

Go to

Configuration T1/E1/ISDN. Enter parameters obtained from phone company or PBX administrator.

ISDN-BRI MultiVOIPs

MVP-410ST/810ST

Go to Configuration ISDN BRI.

Enter parameters obtained from phone company or PBX administrator.

If the voip is connected to BRI extensions of a PBX or a phone company, then select "Terminal"

in the ISDN BRI Parameters screen.

If the voip is connected to ISDN terminal adapters and/or ISDN phones, then select "Network"

in the ISDN BRI Parameters screen.

7.Go to Configuration Regional Parameters. Select the Country/Region that fits your situation. Click Default and confirm. Click OK to exit from the dialog box.

8.Do you want the phone-call logs produced by the MultiVOIP to be sent out by email (to your Voip Administrator or someone else)?

If NO, skip to step 10.

If YES, continue with step 9.

60