Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Power, Boot, Ethernet

MultiVOIP User Guide Overview

Analog MultiVOIP LED Descriptions

MVP210/410/810 Front Panel LED Definitions

LED NAME

DESCRIPTION

General Operation LEDs (one set on each MultiVOIP model)

Power	Indicates presence of power.
Boot	After power up, the Boot LED will be on briefly while the
	MultiVOIP is booting. It lights whenever the MultiVOIP is
	booting or downloading a setup configuration data set.
Ethernet	RCV. Receive. Lights (blinks) when receiving data on
	Ethernet port.
	XMT. Transmit. Lights (blinks) when transmitting data on
	Ethernet port. ..
	LNK. Link. When lit, VOIP “sees” the hub or network via
	the Ethernet connection. ..
	COL. Collision. Lit when data collisions occur. ..

Channel-Operation LEDs (one set for each channel)

XMT	Transmit. This indicator blinks when voice packets are
	being transmitted to the local area network.
RCV	Receive. This indicator blinks when voice packets are
	being received from the local area network.
XSG	Transmit Signal. This indicator lights when the FXS-
	configured channel is off-hook, the FXO-configured
	channel is receiving a ring from the Telco, or the M lead is
	active on the E&M configured channel. That is, it lights
	when the MultiVOIP is receiving a ring from the PBX.
RSG	Receive Signal. This indicator lights when the FXS-
	configured channel is ringing, the FXO-configured channel
	has taken the line off-hook, or the E lead is active on the
	E&M-configured channel.

33