Multi-Tech Systems MVP-2410 Automatic Disconnection group, Consecutive Packets Lost defines, 145

MultiVOIP User Guide		Technical Configuration (Digital Voips)
	Voice/Fax Parameter Definitions (cont’d) )
	Field Name	Values	Description
	Auto Disconnect
	Automatic	--	The Automatic Disconnection group
	Disconnect-		provides four options which can be
	ion		used singly or in any combination.
	Jitter Value	1-65535	The Jitter Value defines the average
		milli-	inter-arrival packet deviation (in
		seconds	milliseconds) before the call is
			automatically disconnected. The default
			is 150 milliseconds. A higher value
			means voice transmission will be more
			accepting of jitter. A lower value is less
			tolerant of jitter.
			Inactive by default. When active,
			default = 150 ms. However, value must
			equal or exceed Dynamic Minimum
			Jitter Value.
	Call Duration	1-65535	Call Duration defines the maximum
		seconds	length of time (in seconds) that a call
			remains connected before the call is
			automatically disconnected.
			Inactive by default.
			When active, default = 180 sec.
			This may be too short for most
			configurations requiring upward
			adjustment.
	Consecutive	1-65535	Consecutive Packets Lost defines the
	Packets Lost		number of consecutive packets that are
			lost after which the call is automatically
			disconnected.
			Inactive by default.
			When active, default = 30
	Network	1 to 65535	Specifies how long to wait before
	Discon-	seconds;	disconnecting the call when IP network
	nection	Default =	connectivity with the remote site has
		300 sec.	been lost.

145