Multi-Tech Systems MVP-3010 manual Snmp Parameter Definitions Field Name Values Description, 161

MultiVOIP User Guide Technical Configuration (Digital Voips)

The SNMP Parameter fields are described in the table below.

SNMP Parameter Definitions

Field Name	Values	Description
Enable SNMP	Y/N	Enables the SNMP code in the firmware
Agent		of the MultiVOIP. This must be
		enabled for the MultiVOIP to
		communicate with and be controllable
		by the
		MultiVoipManager software.
		Default: disabled
Trap Manager	Parameters
Address	4 places; n.n.n.n	IP address of MultiVoipManager PC.
	n = 0-255
Community	--	A “community” is a group of VOIP
Name		endpoints that can communicate with
		each other. Often “public” is used to
		designate a grouping where all end users
		have access to entire VOIP network.
		However, calling permissions can be
		configured to restrict access as needed.
Port Number	162	The default port number of the SNMP
		manager receiving the traps is the
		standard port 162.
Community	Length = 19	First community grouping.
Name 1	characters (max.)
	Case sensitive.
Permissions	Read-Only,	If this community needs to change
	Read/Write	MultiVOIP settings, select Read/Write.
		Otherwise, select Read-Only to view
		settings.
Community	Length = 19	Second community grouping
Name 2	characters (max.)
	Case sensitive.
Permissions	Read-Only,	If this community needs to change
	Read/Write	MultiVOIP settings, select Read/Write.
		Otherwise, select Read-Only to view
		settings.

161