Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual 403, TEI Assignment

MultiVOIP User Guide Operation & Maintenance

ISDN BRI Statistics: Field Definitions

(continued)

Field		Values	Description
Name
Switch		Information:
TEI Assignment
TEI 0 through		0-63(point-to-point	Displays the value for each TEI assigned to
TEI 7		assignments)	the BRI port. The TEI (Terminal Endpoint
		64-126(automatic	Identifier) uniquely identifies each device
			connected to the ISDN physical layer.
		assignments)
Switch		Information:
D-Channel Information
Tx Packets		0 to 4294967295	Shows the number of packets transmitted on
			the channel. When the value exceeds
			4294967295 packets, it will reset to zero
			and continue counting.
Rx Packets		0 to 4294967295	Shows the number of packets received on
			the channel. When the value exceeds
			4294967295 packets, it will reset to zero
			and continue counting.
Switch		Information:
	SPID 0
(SPID 0		numeric,	A SPID (Service Profile Identifier) is
number)		3 to 20 digits	assigned by the ISDN provider and
			pertains to one channel of the BRI
			interface (port), in this case channel 0.
			The SPID identifies an ISDN terminal
			uniquely. The SPID associates a set of
			services (features) with the terminal.
			(In Terminal mode the provider is a
			telco or PBX. In Network mode
			MultiVOIP is the provider.) A SPID is
			only used when the “Country” field is
			set to “USA” in the ISDN BRI
			Parameters screen.
Status		Not Checked,	Indicates whether SPID0 is correct,
		Correct,	incorrect, or not being checked.
		Incorrect

403