Multi-Tech Systems MVP-3010, MVP-2400, MVP-2410 manual Tone Pair Values, 167

MultiVOIP User Guide Technical Configuration (Digital Voips)

The Custom Tone-Pair Settings fields are described in the table below.

Custom Tone-Pair Settings Definitions

Field Name	Values	Description
Tone Pair	dial tone	Identifies the type of telephony
	busy tone	signaling tone for which frequencies
	ring tone,	are being specified.
	‘unobtainable’ &
	re-order tones
TONE PAIR	VALUES	About Defaults: US telephony
		values are used as defaults on this
		screen. However, since this dialog
		box is provided to allow custom
		tone-pair settings, default values are
		essentially irrelevant.
Frequency 1	frequency in Hertz	Frequency of lower tone of pair.
		This outbound tone pair enters the
		MultiVOIP at the T1/E1 port.
Frequency 2	frequency in Hertz	Frequency of higher tone of pair.
		This outbound tone pair enters the
		MultiVOIP at the T1/E1 port.
Gain 1	gain in dB	Amplification factor of lower
	+3dB to –31dB	frequency of pair. This figure
		describes amplification that the
	and “mute” setting
		MultiVOIP applies to outbound
		tones entering the MultiVOIP at
		the T1 port. Default = -16dB
Gain 2	gain in dB	Amplification factor of higher
	+3dB to –31dB	frequency of pair. This figure
	and “mute” setting	describes amplification that the
		MultiVOIP applies to outbound
		tones entering the MultiVOIP at
		the T1 port. Default = -16dB

167