Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Pstn, 183

MultiVOIP User Guide			Technical Configuration (Digital Voips)
	Supplementary Services Definitions (cont’d)
	Field Name	Values		Description
	Call Hold	Y/N		Select to enable Call Hold function in
	Enable			voip unit.
				Call Hold allows one party to maintain an
				idle (non-talking) connection with another
				party while receiving another call (Call
				Waiting), while initiating another call
				(Call Transfer), or while performing some
				other call management function.
	Hold	phone		The numbers and/or symbols that the
	Sequence	keypad		caller must press on the phone keypad to
		characters		initiate a call hold.
				The call-hold sequence can be 1 to 4
				characters in length using any
				combination of digits or characters
				(* or #).
	Call Waiting	Y/N		Select to enable Call Waiting function in
	Enable			voip unit.
	Retrieve	phone		The numbers and/or symbols that the
	Sequence	keypad		caller must press on the phone keypad to
		characters,		initiate retrieval of a waiting call.
		two		The call-waiting retrieval sequence can be
		characters		1 to 4 characters in length using any
		in length		combination of digits or characters
				(* or #).
				This is the phone keypad sequence that a
				user must press to retrieve a waiting call.
				Customize-able. Sequence should be
				distinct from sequence that might be used
				to retrieve a waiting call via the PBX or
				PSTN.

183