Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual 259, Filters button

MultiVOIP User Guide Technical Configuration (Analog/BRI)

“Logs” Screen Definitions

Field Name	Values	Description
Enable Console	Y/N	Allows MultiVOIP debugging messages to be read
Messages		via a basic terminal program like HyperTerminal
		™ or equivalent. Normally, this should be
		disabled because it uses MultiVOIP processing
		resources. Console messages are meant for tech
		support personnel.
Filters (button)		Click to access secondary screen on where console
		messages can be included/excluded by category
		and on a per-channel basis. (See the Console
		Messages Filter Settings screen on subsequent
		page.) Not supported in BRI 5.02c software.
Turn Off Logs	Y/N	Check to disable log-reporting function. Not
		supported in BRI 5.02c software.
Logs Buttons		Only one of these three log reporting methods,
		GUI, SMTP, or SNMP, may be chosen.
GUI	Y/N	User must view logs at the MultiVOIP
		configuration program.
SNMP	Y/N	Log messages will be delivered to the
		MultiVoipManager application program.
SMTP	Y/N	Log messages will be sent to user-specified email
		address.
SysLog Server	Y/N	This box must be checked if logging is to be done
Enable		in conjunction with a SysLog Server program. For
		more on SysLog Server, see Operation &
		Maintenance chapter. Not supported in BRI 5.02c
		software.
IP Address	n.n.n.n	IP address of computer, connected to voip
	for n=	network, on which SysLog Server program is
	0-255	running. Not supported in BRI 5.02c software.
Port	514	Logical port for SysLog Server. 514 is commonly
		used. Not supported in BRI 5.02c software.
Online Statistics	integer	Set the interval (in seconds) at which logging
Updation Interval		information will be updated. Not supported
		in BRI 5.02c software.

259