Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Pstn, 265

MultiVOIP User Guide Technical Configuration (Analog/BRI)

Supplementary Services Definitions (cont’d)

Field Name	Values	Description
Call Hold	Y/N	Select to enable Call Hold function in
Enable		voip unit.
		Call Hold allows one party to maintain an
		idle (non-talking) connection with another
		party while receiving another call (Call
		Waiting), while initiating another call
		(Call Transfer), or while performing some
		other call management function.
Hold	phone	The numbers and/or symbols that the
Sequence	keypad	caller must press on the phone keypad to
	characters	initiate a call hold.
		The call-hold sequence can be 1 to 4
		characters in length using any
		combination of digits or characters
		(* or #).
Call Waiting	Y/N	Select to enable Call Waiting function in
Enable		voip unit.
Retrieve	phone	The numbers and/or symbols that the
Sequence	keypad	caller must press on the phone keypad to
	characters,	initiate retrieval of a waiting call.
	two	The call-waiting retrieval sequence can be
	characters	1 to 4 characters in length using any
	in length	combination of digits or characters
		(* or #).
		This is the phone keypad sequence that a
		user must press to retrieve a waiting call.
		Customize-able. Sequence should be
		distinct from sequence that might be used
		to retrieve a waiting call via the PBX or
		PSTN.

265