Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Phone/IP Details *Absolutely Needed* cont’d

MultiVOIP User GuideQuick Start Instructions

Phone/IP Details *Absolutely Needed* (cont’d)

Gather Telephone Information (E1)

➼ E1 Phone Parameters	Info needed to operate:
Ask phone company or	MVP3010
PBX maintainer.

#E1 Telephony Parameters: Record for this VOIP Site

•Which frame format is used? Double Frame_____

MultiFrame w/ CRC4_____

MultiFrame w/ CRC4 modified_____

•Which CAS or PRI protocol is used? ______________

•Clocking: Does the PBX or telco switch use

internal or external clocking? _________________

Note that the setting used in the voip unit will be the opposite of the setting used by the telco/PBX.

•Which line coding is used? AMI___ or HDB3___

•Pulse shape level?: (most commonly 0 to 40 meters)

Gather Telephone Information (Analog)

➼ Analog Phone Parameters	Needed for:
Ask phone company or	MVP810
	MVP410
telecom manager.	MVP210
	MVP130

#Analog Telephony Interface Parameters:

Record for this VOIP Site

•Which interface type (or “signaling”) is used?

E&M_____ FXS/FXO_____

•If FXS, determine whether the line will be used for a phone, fax, or KTS (key telephone system)

•If FXO, determine if line will be an analog PBX extension or an analog line from a telco central office

•If E&M, determine these aspects of the E&M trunk line from the PBX:

• What is its Type (1, 2, 3, 4, or 5)?

• Is it 2-wire or 4-wire?

• Is it Dial-Tone or Wink?

49