Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Setting and Downloading User Defaults, 421

MultiVOIP User Guide Operation & Maintenance

5.After the PC gets a response from the MultiVOIP, the Dialog – IP Parameters screen will appear.

The user should verify that the correct IP parameter values are listed on the screen and revise them if necessary. Then click OK.

6. Progress bars will appear at the bottom of the screen during the data transfer.

The MultiVOIP’s “Boot” LED will turn off at the end of the transfer.

7. The Download Factory Defaults procedure is complete.

Setting and Downloading User Defaults

The Download User Defaults command allows you to maintain a known working configuration that is specific to your VOIP system. You can then experiment with alterations or improvements to the configurations confident that a working configuration can be restored if necessary.

1.Before you can invoke the Download User Defaults command, you must first save a set of configuration parameters by using the Save Setup command in the sidebar menu of the MultiVOIP software.

421