Multi-Tech Systems MVP-3010 Regional Parameter Definitions Field Name Values Description, 164

Technical Configuration (Digital Voips) MultiVOIP User Guide

The Regional Parameters fields are described in the table below.

“Regional Parameter” Definitions

Field Name	Values	Description
Country/	USA, Japan, UK,	Name of a country or region that uses a
Region	Custom	certain set of tone pairs for dial tone,
		ring tone, busy tone, ‘unobtainable’
		tone (fast busy tone) and re-order tone
		(a tone pattern indicating the need for
		the user to hang up the phone). In
		some cases, the tone-pair scheme
		denoted by a country name may also
		be used outside of that country. The
		“Custom” option (button) assures that
		any tone-pairing scheme worldwide
		can be accommodated.
Type column	dial tone,	Type of telephony tone-pair for which
	ring tone,	frequency, gain, and cadence are being
	busy tone,	presented.
	unobtainable tone
	(fast busy),
	& re-order tone
Frequency 1	frequency in Hertz	Lower frequency of pair.
Frequency 2	frequency in Hertz	Higher frequency of pair.
Gain 1	gain in dB	Amplification factor of lower
	+3dB to –31dB	frequency of pair.
	and “mute” setting	This figure describes amplification that
		the MultiVOIP
		applies to outbound tones entering the
		MultiVOIP at
		the T1 port. Default: -16dB
Gain 2	gain in dB	Amplification factor of higher
	+3dB to –31dB	frequency of pair.
	and “mute” setting	This figure describes amplification that
		the MultiVOIP
		applies to outbound tones entering the
		MultiVOIP at
		the T1 port. Default: -16dB

164