Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Routed, 498

Embedded Gatekeeper MultiVOIP User Guide

Call Details Field Definitions

Field Name	Values	Description
Call General Info
Call No.		Call Number. Accession number identifying a
		call in progress.
Cid Sum		The conference ID number (CID) is a
		unique non-zero value created by the
		calling endpoint and passed in various
		H.225.0 messages. The CID identifies
		the conference with which the message is
		associated. Therefore, messages from all
		endpoints participating in the same
		conference will have the same CID.
Call ID Sum		The call ID number is a globally unique
		non-zero value created by the calling
		endpoint and passed in various H.225.0
		messages. The Call ID identifies the call
		with which the message is associated.
Call Model	direct	Indicates whether the call is direct or
	OR	routed. .
	routed	For direct-mode calls, the gatekeeper gives
		each endpoint involved in the call the
		destination address of the other and establishes
		a common call-signaling channel for them to
		use during the call. Then the two endpoints
		conduct the call without further gatekeeper
		involvement.
		For routed-mode calls, the gatekeeper
		establishes a connection between the two
		endpoints but keeps itself involved in call
		signaling for the duration of the call. In routed
		mode, the gatekeeper keeps a call-signaling
		channel open for the entire duration of the
		call. As a call-management service, the
		gatekeeper can change the routing of the call
		(by line hunting) while the calls is in progress.
		If the gatekeeper is to implement
		supplementary (H.450) services, it must
		operate in routed mode.

498