Multi-Tech Systems MVP-3010, MVP-2400, MVP-2410 manual Phone/IP Starter Configuration

Quick Start Instructions MultiVOIP User Guide

Phone/IP Starter Configuration (continued)

11.Enable premium (H.450) telephony features. (Not supported in BRI 502c software.)

Go to Supplementary Services. Select any features to be used.

For Call Hold, Call Transfer, & Call Waiting, specify the key sequence that the phone user will press to invoke the feature. For Call Name Identification, specify the allowed name types to be used and a caller-id descriptor.

If Call Forwarding is to be used, enable this feature in the

Add/Edit Inbound Phone Book screen.

After making changes, click on OK in the current configuration screen before moving on to the next configuration screen.

12.(For analog gatekeeper-equipped models only. These have model numbers with a “G” suffix.

For MVP2410G, skip to step 13 and see User Guide for embedded gatekeeper info.

For units without embedded gatekeeper, skip to step 13.)

For quick-start purposes, we will arrange for the gatekeeper-equipped voip unit to register itself as a client of its own gatekeeper capability. Then we will set up a gatekeeper-controlled call from one channel to another of that self- same gatekeeper-equipped voip unit to demonstrate that the gatekeeper functionality is active. Thereafter, you can register additional voip units (and other endpoints) with the gatekeeper-equipped voip per instructions in the

User Guide.

62