Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual 226, Fxs

Technical Configuration (Analog/BRI) MultiVOIP User Guide

FXS Loop Start Interface: Parameter Definitions

Field Name	Values	Description
Message	Y/N	Applicable only when MultiVOIP
Waiting Light		is used with Avaya Magix PBX
		units equipped with Merlin
		Messaging Centralized mail.
		When enabled, the Message
		Waiting Light feature allows the
		PBX to send mode-codes and
		message-waiting indications to
		another Avaya Magix PBX, which
		in turn will turn on the message
		waiting light on a phone station. It
		also allows Direct Inward Dialing,
		such that no additional dial tone is
		needed on voip call.
Ring Count,	integer values	Maximum number of rings that the
FXS		MultiVOIP will issue before giving
		up the attempted call.
FXS Options,	Y/N	When enabled, the MultiVOIP will
Current Loss		interrupt loop current in the FXS
		circuit to initiate a disconnection.
		This tells the device connected to
		the FXS port to hang up. The
		Multi-VOIP cannot drop the call;
		the FXS device must go on hook.

226