Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Properties button

Quick Start Instructions MultiVOIP User Guide

5. Open the HyperTerminal program.

6.Use HyperTerminal to receive and record console messages from the MultiVOIP unit. To do so, set up HyperTerminal as follows (setup shown is for Windows NT4; details will differ slightly in other MS operating systems):

In the upper toolbar of the HyperTerminal screen, click on the

Properties button.

In the “Connect To” tab of the Connection Properties dialog box, click on the Configure button.

In the next dialog box, on the “General” tab, set “Maximum

Speed” to 115200 bps.

On the “Connection” tab, set connection preferences to:

Data bits: 8

Parity: none

Stop bits: 1

Click OK twice to exit settings dialog boxes.

7. Make VOIP call.

for digital MultiVOIPs	for analog MultiVOIPs
(MVP-2400/2410/3010	(MVP-130/210/410/810)
Make call from an extension of	Make call on a local phone line
the local PBX.	accessing PSTN directly or
	through key system

82