Multi-Tech Systems MVP-2410, MVP-2400 IP Parameter Definitions Field Name Values Description, 211

MultiVOIP User Guide Technical Configuration (Analog/BRI)

The IP Parameters fields are described in the table below.

IP Parameter Definitions

Field Name	Values	Description
Enable Diffserv	Y/N	Diffserv is used for QoS
		(quality of service). When
		enabled, the TOS (Type of
		Service) bits in the IP
		header are configured so
		that routers supporting
		Diffserv can give priority to
		the VOIP’s IP packets.
		Disabled by default.
Frame Type	Type II, SNAP	Must be set to match
		network’s frame type.
		Default is Type II.
IP Address	4-places, 0-255	The unique LAN IP address
		assigned to the MultiVOIP.
IP Mask	4-places, 0-255	Subnetwork address that
		allows for sharing of IP
		addresses within a LAN.
Gateway	4-places, 0-255.	The IP address of the
		device that connects your
		MultiVOIP to the Internet.
Enable DNS	Y/N.	Enables Domain Name
	(feature not yet	Space/System function
	implemented; for	where computer names are
	future use)	resolved using a worldwide
		distributed database.
DNS Server IP	4-places, 0-255	IP address of specific DNS
Address	(feature not yet	server to be used to resolve
	implemented; for	Internet computer names.
	future use)
FTP Server	Y/N	MultiVOIP unit has an FTP
Enable	See “FTP Server	Server function so that
	File Transfers” in	firmware and other
	Operation &	important operating
	Maintenance	software files can be
	chapter.	transferred to the voip via
		the network.

211