Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual 234

Technical Configuration (Analog/BRI) MultiVOIP User Guide

E&M Interface Parameter Definitions

Field Name	Values	Description
Interface	E&M	enables E&M functionality
Type	Types 1-5. Each	Refers to the type of E&M
	type can be 2-wire	interface being used.
	or 4-wire.
Signal	Dial Tone or	When Dial Tone is selected, no
	Wink	wink is required on the E lead or M
		lead in the call initiation or setup.
		When Wink is selected, a wink is
		required during call setup.
Wink Timer	integer values,	This is the length of the wink for
(in ms)	in milliseconds	wink signaling.
		Applicable only when Signal
		parameter is set to “Wink.”
Pass Through	Y/N	When enabled (“Y”), this feature is
		used to create an open audio path
		for 2- or 4-wire. The E&M leads
		are passed through the voip
		transparently.
		Applicable only for E&M
		Signaling with Dial Tone.

234