Multi-Tech Systems MVP-2410 Calling Party field is, Party, and Connected Party fields are, 184

Technical Configuration (Digital Voips)				MultiVOIP User Guide
	Supplementary Services Definitions (cont’d)
	Field Name	Values	Description
	Call Name		Enables CNI function. Call Name
	Identification		Identification is not the same as Caller ID.
	Enable		When enabled on a given voip unit
			currently being controlled by the
			MultiVOIP GUI (the ‘home voip’), Call
			Name Identification sends an identifier
			and status information to the
			administrator of the remote voip involved
			in the call. The feature operates on a
			channel-by-channel basis (each channel
			can have a separate identifier).
			If the home voip is originating the call,
			only the	Calling Party field is
			applicable. If the home voip is receiving
			the call, then the Alerting Party, Busy
			Party, and Connected Party fields are
			the only applicable fields (and any or all
			of these could be enabled for a given voip
			channel). The status information confirms
			back to the originator that the callee (the
			home voip) is either busy, or ringing, or
			that the intended call has been completed
			and is currently connected.
			The identifier and status information are
			made available to the remote voip unit
			and appear in the Caller ID field of its
			Statistics – Call Progress screen. (This is
			how MultiVOIP units handle CNI
			messages; in other voip brands, H.450
			may be implemented differently and then
			the message presentation may vary.)

184