264

Technical Configuration (Analog/BRI)	MultiVOIP User Guide

The Supplementary Services fields are described in the tables below.

Supplementary Services Parameter Definitions

(Not supported in BRI 5.02c software.)

Field Name	Values	Description

Select	1-2 (210);	The channel to be configured is selected
Channel	1-4 (410);	here.
	1-8 (810)

Call Transfer	Y/N	Select to enable the Call Transfer function
Enable		in the voip unit.
		This is a “blind” transfer and the sequence
		of events is as follows:
		Callers A and B are having a
		conversation.
		Caller A wants to put B into contact with
		C.
		Caller A dials call transfer sequence.
		Caller A hears dial tone and dials number
		for caller C.
		Caller A gets disconnected while Caller B
		gets connected to caller C.

Transfer	any phone	The numbers and/or symbols that the
Sequence	keypad	caller must press on the phone keypad to
	character	initiate a call transfer.
		The call-transfer sequence can be 1 to 4
		characters in length using any
		combination of digits or characters
		(* or #).
		The sequences for call transfer, call hold,
		and call waiting can be from 1 to 4 digits
		in length consisting of any combination
		of digits 1234567890*#.