Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Address, 289

MultiVOIP User Guide			T1 PhoneBook Configuration
	PhoneBook Configuration Parameter Definitions
		(cont’d)
	Field Name	Values	Description
	Single Port Protocol (SPP)
	[continued]
	Client Options		Client Option fields are active
			only in registrar/client mode and
			only for client voip units.
	Registrar IP		This is the IP address of the
	Address		registrar voip to which this client
			is assigned. (Default value =
			0.0.0.0; effectively, there is no
			useful default value.)
	Registrar Port		This is the port number of the
			registrar voip to which this client
			is assigned. (Default port number
			= 10000.)
	Registrar Options		Registrar Option fields are active
			only in registrar/client mode and
			only for registrar voip units.
	Keep Alive		Time-out duration before a
	(in sec.)		registrar will unregister a client
			that does not send its “I’m here”
			signal. Client normally sends its
			“I’m here” signal every 20
			seconds. Timeout default = 60
			seconds.

289