Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Switch Information, 238

Technical Configuration (Analog/BRI) MultiVOIP User Guide

ISDN-BRI Parameter Definitions

Field Name	Values	Description
Select BRI	ISDNn	In this field, you will choose which
Interface	for n= 1-2 (410ST)	ISDN port you are configuring.
	for n=1-4 (810ST)	The 410ST has two ISDN –BRI
		ports (or “interfaces”); the 810ST
		has four ISDN-BRI ports (or
		“interfaces”). Each port has two
		channels.
Layer 1	either “Terminal”	When “Terminal” is selected, it
Interface	or “Network”	indicates that the MultiVOIP
		should emulate the subscriber
		(terminal) side of the digital
		connection. When “Network” is
		selected, it indicates that the
		MultiVOIP should emulate the
		central office (network) side of the
		digital connection.
		If connecting to a telco or PBX
		then choose “Terminal.” If
		connecting to an ISDN phone or
		terminal adapter, then choose
		“Network.” Default = Terminal.
Dialing Options	Inter Digit Timer	Dialing options are relevant when
	(value in	the MultiVOIP provides dial tone
	milliseconds)	either during an overlap receiving
		mode or providing a second dial
		tone. Default is 2000, which is 2
		seconds. Range 250 ms to 10000
		ms (1/4 sec to 10 sec).
Switch	Information
Country	see table below	Country in which MultiVOIP is
		operating with ISDN.
Operator	see table below	Indicates phone switch
		manufacturer/model or refers to
		telco so as to specify the switching
		system in question.
		ISDN is implemented somewhat
		differently in different switches
		(different software stacks are used).

238