Multi-Tech Systems MVP-2400, MVP-2410 manual Compton MVP410G Gateway Functions and Settings, 456

Embedded Gatekeeper MultiVOIP User Guide

The required MVP410G phonebook configuration is shown below.

“Compton” MVP410G Gateway Functions and Settings

Function	PhBk Config	Inbound PhoneBook	Phone User’s
	Scn Settings 1	Screen Settings	Actions

Put MVP410G	Gatekeeper IP	--	--
gateway under	Address =
gatekeeper	192.168.80.12
control
Give remote	Gateway	Remove Prefix = 5;	Dial 4 digits
users access to	Prefix = 5	Add Prefix = 5	beginning with
Compton			“5”
factory PBX
extensions
Give remote	Gateway	Remove Prefix = 59;	Dial “59” plus
users access to	H.323 ID	Add Prefix= 9	Compton local
Compton area	= 59		number
PSTN
		Outbound PhoneBook
		Screen Settings
Get access to	--	Destination Pattern = 7	Dial 4 digits
Mucksville		RemovePrefix = 7	beginning with
office PBX		Select “Use GateKeeper”	“7”
extensions		Gateway H.323ID = none
		Gateway Prefix = 7
Get access to	--	Destination Pattern = 79	Dial “79” plus
Mucksville area		RemovePrefix = none	Mucksville
PSTN		Select “Use GateKeeper”	local number
		Gateway H.323ID = 79
		Gateway Prefix = none
Get access to	--	Destination Pattern = 6000	Dial 6000.
Rootersville		RemovePrefix = none
office phone		Select “Use GateKeeper”
		Gateway H.323ID = 6000
		Gateway Prefix = none
Get access to	--	Destination Pattern = 6	Dial “6”;
Rootersville		RemovePrefix = none	get second dial
area PSTN		Select “Use GateKeeper”	tone. Dial
		Gateway H.323ID = 6	Hoot #.
1. “PhoneBook Configuration
screen settings”		Gateway Prefix = none

456