Multi-Tech Systems MVP-2410, MVP-2400 MVP130 Front Panel LED Definitions, General Operation LEDs

Overview MultiVOIP User Guide

MVP130 Front Panel LED Definitions

LED NAME

DESCRIPTION

General Operation LEDs

Power	Indicates presence of power.
Boot	After power up, the Boot LED will be on briefly while the
	MultiVOIP is booting. It lights whenever the MultiVOIP is
	booting or downloading a setup configuration data set.
Ethernet	SP. During normal operation, the SP LED lights to indicate
	100Mbps is selected.
	AC. During normal operation, the AC LED lights when
	transmitting or receiving. It will flash at a rate of 50ms high
	and 50ms low when active.
	CL. During normal operation, the CL LED lights to indicate
	a collision. It will flash at a rate of 50ms high and 50ms low
	when active.
	LK. During normal operation, the LK LED lights to
	indicate a good link is detected.

Channel-Operation LEDs

TX

RX

XS

RS

Transmit. This indicator blinks when voice packets are being transmitted to the local area network.

Receive. This indicator blinks when voice packets are being received from the local area network.

Transmit Signal. This indicator lights when the FXS-configured channel is off-hook or the FXO- configured channel is receiving a ring from the Telco or PBX.

Receive Signal. This indicator lights when the FXS- configured channel is ringing or the FXO-configured channel has taken the line off-hook.

34