Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual 246, 16dB

Technical Configuration (Analog/BRI) MultiVOIP User Guide

The Regional Parameters fields are described in the table below.

“Regional Parameter” Definitions

Field Name	Values	Description
Country/	USA, Japan, UK,	Name of a country or region that uses a
Region	Custom	certain set of tone pairs for dial tone,
	Note:	ring tone, busy tone, and
	“Survivability”	‘unobtainable’ tone (fast busy tone),
	tone indicates a	survivability tone (tone heard briefly, 2
	special type of	seconds, after going offhook denoting
	call-routing	survivable mode of voip unit) and re-
	redundancy &	order tone (a tone pattern indicating
	applies to	the need for the user to hang up the
	MultiVantage voip	phone). In some cases, the tone-pair
	units only.	scheme denoted by a country name
		may also be used outside of that
		country. The “Custom” option
		(button) assures that any tone-pairing
		scheme worldwide can be
		accommodated.
Type column	dial tone,	Type of telephony tone-pair for which
	ring tone,	frequency, gain, and cadence are being
	busy tone,	presented.
	unobtainable tone
	(fast busy),
	survivability tone,
	re-order tone
Frequency 1	freq. in Hertz	Lower frequency of pair.
Frequency 2	freq. in Hertz	Higher frequency of pair.
Gain 1	gain in dB	Amplification factor of lower
	+3dB to –31dB	frequency of pair.
	and “mute” setting	This applies to the dial, ring, busy and
		‘unobtainable’ tones that the
		MultiVOIP outputs as audio to the
		FXS, FXS, or E&M port. Default: -
		16dB
Gain 2	gain in dB	Amplification factor of higher
	+3dB to –31dB	frequency of pair.
	and “mute” setting	This applies to the dial, ring, busy, and
		‘unobtainable’ (fast busy) tones that
		the MultiVOIP outputs as audio to the
		FXS, FXO, or E&M port. Default: -
		16dB

246