Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual 156

Technical Configuration (Digital Voips) MultiVOIP User Guide

E1 Parameter Definitions (cont’d)

ISDN Parameters
Field Name	Values	Description
Enable	Y/N	If digital connection is ISDN-PRI
ISDN-PRI		type, this box should be checked.
		When ISDN is enabled, the “CAS
		Protocols” field is grayed out
		(ISDN has its own signaling
		method).
Terminal/	either “Terminal”	When “Terminal” is selected, it
Network	or “Network”	indicates that the MultiVOIP
		should emulate the subscriber
		(terminal) side of the digital
		connection. When “Network” is
		selected, it indicates that the
		MultiVOIP should emulate the
		central office (network) side of the
		digital connection.
		Setting used for MultiVOIP must
		be opposite to the setting used in
		the PBX. For example, if the PBX
		is set to “Terminal,” then the
		MultiVOIP must be set to
		“Network.”
Country	see table, later this	Country in which MultiVOIP is
	chapter	operating with ISDN.
Operator	see table, later this	Indicates phone switch
	chapter	manufacturer/model or refers to
		telco so as to specify the switching
		system in question. ISDN is
		implemented somewhat differently
		in different switches.
Note on Country	__	[ISDN implementation options are
& Operator		shown, arranged by country, in a
options.		table below – soon after E1
		Parameter Definitions.]

156