Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual 231, Dialing Options cont’d

MultiVOIP User Guide Technical Configuration (Analog/BRI)

FXO Interface: Parameter Definitions (cont’d)

Field Name	Values	Description
Dialing Options (cont’d)
Inter Digit	milliseconds	The length of time between the
Regeneration		outputting of DTMF digits.
Time		Default = 100 ms.
FXO Disconnect On		There are three possible criteria for
		disconnection under FXO: current
		loss, tone detection, and silence
		detection. Disconnection can be
		triggered by more than one of the
		three criteria.
Current Loss	Y/N	Disconnection to be triggered by
		loss of current. That is, when
		Current Loss is enabled (“Y”), the
		MultiVOIP will hang up the call
		when it detects a loss of current
		initiated by the attached device.
FXO Current	integer values	The minimum time required for
Detect Timer	(in milliseconds )	detecting the current loss signal on
		the FXO interface. In other words,
		this is the minimum length of time
		the current must be absent to
		validate ‘current loss’ as a
		disconnection criterion. Default =
		500 ms.
Tone Detection	Y/N	Disconnection to be triggered by a
		tone sequence.

231