Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Compton Gatekeeper Functions & Settings, 462

Embedded Gatekeeper MultiVOIP User Guide

6.MVP140G Gatekeeper Function. We will configure the gatekeeper function of the MVP410G at Compton as summarized in the table below. It is useful to begin the configuration process by listing the functionality that you want to implement in your system.

“Compton” Gatekeeper Functions & Settings

Function	GK Services	GK General	Phone User’s
	Screen Settings	Settings Screen	Actions
Activate	--	Reg Pol. = All Endpts	--
gatekeeper		Accepts Calls Y
function of		GK Active Y
MVP410G
		GK Service
		Properties
		Screen Settings
Access to	V2 GW Prefix =	“Allow as default to	Dial 4 digits
Compton	TEL:5	online endpoints”	beginning with “5”
factory PBX	As set in PhoneBook	= Y
extensions	Configuration screen,	“Allow as public for Out-
	Gateway Prefix field of	of-Zone Endpoints” = Y
	Compton MVP410G
	voip.
Access to	GK Defined	“Allow as default to	Dial “59” plus
Compton area	Services Prefix = 59	online endpoints”	Compton local
PSTN		= Y	number
Access to	V2 GW Prefix =	“Allow as default to	Dial 4 digits
Mucksville	TEL:7	online endpoints”	beginning with “7”
office PBX	As set in PhoneBook	= Y
extensions	Configuration screen,	“Allow as public for Out-
	Gateway Prefix field of	of-Zone Endpoints” = Y
	Mucksville MVP2410
	voip.
Access to	GK Defined	“Allow as default to	Dial “79” plus
Mucksville	Services Prefix = 79	online endpoints”	Mucksville local
area PSTN		= Y	number
Access to	GK Defined	“Allow as default to	Dial 6000.
Rootersville	Services Prefix =	online endpoints”
office phone	6000	= Y
Access to	GK Defined	“Allow as default to	Dial “6”.
Rootersville	Services Prefix = 6	online endpoints”	Dial local R’ville
area PSTN		= Y	number.

462