Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Automatic Disconnection group, 222

Technical Configuration (Analog/BRI) MultiVOIP User Guide

Voice/Fax Parameter Definitions (cont’d) )

Field Name	Values	Description
Auto Disconnect
Automatic	--	The Automatic Disconnection group
Disconnect-		provides four options which can be
ion		used singly or in any combination.
Jitter Value	1-65535	The Jitter Value defines the average
	milli-	inter-arrival packet deviation (in
	seconds	milliseconds) before the call is
		automatically disconnected. The default
		is 300 milliseconds. A higher value
		means voice transmission will be more
		accepting of jitter. A lower value is less
		tolerant of jitter.
		Inactive by default. When active,
		default = 300 ms. However, value must
		equal or exceed Dynamic Minimum
		Jitter Value.
Call Duration	1-65535	Call Duration defines the maximum
	seconds	length of time (in seconds) that a call
		remains connected before the call is
		automatically disconnected.
		Inactive by default.
		When active, default = 180 sec.
		This may be too short for most
		configurations, requiring upward
		adjustment.
Consecutive	1-65535	Consecutive Packets Lost defines the
Packets Lost		number of consecutive packets that are
		lost after which the call is automatically
		disconnected.
		Inactive by default.
		When active, default = 30
Network	1 to 65535	Specifies how long to wait before
Discon-	seconds;	disconnecting the call when IP network
nection	Default =	connectivity with the remote site has
	30 sec.	been lost.

222