Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Local Configuration, 199

MultiVOIP User Guide Technical Configuration (Analog/BRI)

Local Configuration

This manual primarily describes local configuration with the Windows GUI. After IP addresses have been set locally using the Windows GUI, most aspects of configuration (logging functions are an exception) can be handled through the web browser GUI, as well (see the Operation and Maintenance chapter of this manual). In most aspects of configuration, the Windows GUI and web- browser GUI differ only graphically, not functionally. For information on SNMP remote configuration and management, see the MultiVoipManager documentation.

Pre-Requisites

To complete the configuration of the MultiVOIP unit, you must know several things about the overall system.

Before configuring your MultiVOIP Gateway unit, you must know the values for several IP and telephone parameters that describe the IP network system and telephony system (PBX or telco central office equipment) with which the digital MultiVOIP will interact. If you plan to receive log reports on phone traffic by email (SMTP), you must arrange to have an email address assigned to the VOIP unit on the email server on your IP network.

IP Parameters

The following parameters must be known about the network (LAN, WAN, Internet, etc.) to which the MultiVOIP will connect:

➼	Ask your computer network	Info needed to operate:
	administrator.	all MultiVOIP models.

#IP Network Parameters: Record for each VOIP Site in System

•IP Address

•IP Mask

•Gateway

•Domain Name Server (DNS) Info

(not implemented; for future use)

199