Rackmount Installation
The Rackmount kits for the Giga-AccessEtherLinX-II are sold separately:
Description | Part | Accessories | Installation |
| Number | | |
19" Rackmount | 895-39226 | Includes two brackets | The brackets are |
brackets | | that screw onto either | attached to the unit and |
| | side of the Giga- | then the Giga- |
| | AccessEtherLinX-II. | AccessEtherLinX-II is |
| | | installed into the rack. |
19" Rackmount | 895-39949 | Fits into the 19" rack | The Giga-AccessEtherLinX- |
shelf | | and holds up to 3 units | II can be secured to the |
| | of the Giga- | shelf. |
| | AccessEtherLinX-II. | |
INSTALLATION TIP
Single-strand fiber products use optics that transmit and receive on two different wavelengths. Single-strand fiber products must be deployed in pairs, connecting two compatible single-strand fiber products. Connect the 852-10310 (1310 xmt and 1550 rcv), for example, to a product with 1550 xmt and 1310 rcv, e.g., 852-10311 (1550 xmt and 1310 rcv.) The two connected products must also have the same speed and distance capabilities (i.e. both are single-mode [20 km] or both are single/PLUS [40 km]).
Features
Two Layer Qualified Q-in-Q Support
Each drop port can be assigned two different VLAN tags to incoming frames based on the frames PRI or DSCP priority value and IP or Non-IP Frames types. In this way, incoming traffic to the network can be groomed into different VLAN tributaries before entering the network.
AutoCross Feature for Twisted Pair Connection
All twisted pair ports on the Giga-AccessEtherLinX-II include AutoCross, a feature which automatically selects between a Crossover workstation or Pass-Through connection depending on the connected device.
Software Configurable Features
The Link Fault Pass-Through, Selective Advertising, as well as Qualified VLAN tags and Bandwidth Control features are all configurable via the SNMP IP-Less management, DB-9 console configuration or Telnet session.
