Main Configuration Screen
After running through an initial self test, the screen will display: Press Enter for Device Configuration. Press Enter to be taken to the main configuration screen.
The Main Configuration screen contains the following:
Saved Values — displays changes made during current session.
•IP Address (Should be assigned during initial configuration)
•Subnet Mask (Should be assigned during initial configuration)
•Default Gateway
Current Values — displays values currently in use.
•IP Address (IP address of SNMP agent)
•Subnet Mask (mask to define IP subnet agent is connected to)
•Default Gateway (default router for IP traffic outside subnet)
Command List
•I = Enter New Saved Parameter Values
•P = Change Password
•T = New Trap Destination
•K = Remove ALL Trap Destinations
•C = New Community String
•U = Delete ALL Community Strings
•D = Enable/Disable DHCP
•E = End Session
•Space Bar = Opens device specific configuration options
6
