Using Telnet

Assign the Giga-AccessEtherLinX-II an IP Address or use the default IP Address 10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations done via the console port can also be performed using Telnet. The user should only open one Telnet or RS232 console session at a time. Do not use an RS232 console session and a Telnet session at the same time as unexpected results may occur.

LED Operation

Downlink Ports

LNK/ACT Glows green when link is established on port.

Blinks green during data activity on port.

FDX/COL Glows green when port is operating in Full-Duplex.

Blinks green when collisions occur on port.

No display when port is operating in HDX

29

Page 32
Image 32
IMC Networks Giga-AcessEtherLinx-II operation manual Using Telnet, LED Operation Downlink Ports