About the Giga-AccessEtherLinX-II
The Giga-AccessEtherLinX-II Series enables service providers to offer differentiated data networking or VPN services to multi-tenant building and business customers. Residing at the customer premises or at the service provider POP, Giga- AccessEtherLinX-II provides a VLAN-based Layer 2 entry point to the MAN fiber network, trunking, differentiating and grooming customer traffic. Featuring remote SNMP management, port bandwidth control, QinQ support, QoS, traffic prioritization and multicast pruning (using IGMP v1, v2), it is an ideal solution for delivering Ethernet-based services to customers quickly and cost-effectively.
Giga-AccessEtherLinX-II offers configuration access via Telnet, console, secure IP-Less, and SNMP management channels. Software upgrades can be initiated via any one of these access methods.
The Giga-AccessEtherLinX-II includes one Uplink port (either 1000Base-FX fiber or 10/100/1000 twisted pair) and four 10/100/1000 Mbps twisted pair Ethernet Downlink Ports for connecting users/LANs, and supports jumbo frame sizes of up to 9600 bytes.
The Giga-AccessEtherLinX-II offers various wavelengths for SM and MM fiber at gigabit speed; single-strand and SFP versions are also available. As a standalone unit, it is available in an internal AC or DC version.
Installing the Giga-AccessEtherLinX-II
The Giga-AccessEtherLinX-II comes ready to install; there is no hardware configuration required. All features, such as management access, qualified VLAN tags, Link Fault Pass-Through and Auto Negotiation are software configurable.
Place the Giga-AccessEtherLinX-II on a flat surface, prior to installation. Attach the cables between the Giga-AccessEtherLinX-II and each device that will be interconnected and then plug the unit into a reliable power source.
