Multi-Tech Systems MVP-3010, MVP-2400, MVP-2410 manual MultiVOIP User Guide Quick Start Instructions

MultiVOIP User Guide Quick Start Instructions

8. Read console messages recorded on HyperTerminal.

Console Messages from Originating VOIP. The voip unit that originates the call will send back messages like that shown below.

[00026975]	CAS[0] : RX : ABCD = 1, 1, 1, 1,Pstn State[1]
	TimeStamp : 26975
[00027190]	CAS[0] : TX : ABCD = 1, 1, 1, 1
[00027190]	PSTN: cas seizure detected on 0
[00027440]	CAS[0] : TX : ABCD = 0, 0, 0, 0
[00033290]	PSTN:call detected on 0 num=17637175662*
[00033290] H323IF[0]:destAddr =
	TA:200.2.10.5:1720,NAME:Mounds
	View,TEL:17637175662,17637175662
[00033290] H323IF[0]:srcAddr = NAME:New
	York,TA:200.2.9.20
[00033440]	H323IF [0]:cmCallStateProceeding
[00033500]	H323[0]: Remote Information (Q931): MultiVOIP
	- T1
[00033565]	CAS[0] : TX : ABCD = 1, 1, 1, 1
[00033675]	H323IF [0]: MasterSlaveStatus=Slave
[00033675]	H323IF[0]:FastStart Setup Not Used
[00033690]	CAS[0] : TX : ABCD = 1, 1, 1, 1
[00033755]	H323IF[0]: Coder used 'g7231'
[00033810]	PSTN:pstn call connected on 0

83