Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual 225

MultiVOIP User Guide Technical Configuration (Analog/BRI)

FXS Loop Start Parameters. The parameters applicable to FXS Loop Start are shown in the figure below and described in the table that follows.

FXS Loop Start Interface: Parameter Definitions

Field Name	Values	Description
FXS Loop Start	Y/N	Enables FXS Loop Start interface
		type.
Inter Digit	integer values	This is the length of time that the
Timer	in seconds	MultiVOIP will wait between
		digits. When the time expires, the
		MultiVOIP will look in the
		phonebook for the number entered.
		Default = 2.

225