Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Rcv, Xmt, Lnk, Col, Pri, Onl

Overview MultiVOIP User Guide

MVP2400/2410 Front Panel LED Definitions

LED NAME	DESCRIPTION
Power	Indicates presence of power.
Boot	After power up, the Boot LED will be on for about 10
	seconds while the MVP2400/2410 is booting.
RCV	Receive. Lights when receiving data on Ethernet port.
XMT	Transmit. Lights when transmitting data on Ethernet
	port.
LNK	Link. When lit, VOIP “sees” the hub or network via
	the Ethernet connection.
COL	Collision. Lit when data collisions occur.
T1	When lit, indicates presence of T1 connection.
E1	E1. Not supported.
PRI	PRI. On if T1 line is of ISDN-Primary-Rate type.
ONL	Online. This LED is on when frame synchroni-zation
	has been established on the T1/E1 link.
IC	IC LED is on when Internal Clocking is selected in
	T1/E1 configuration.
LC	Indicates Loss of Carrier.
LS	Indicates Loss of Signal.
Test	For testing purposes only.

18