Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual 232, FXO Disconnect On cont’d

Technical Configuration (Analog/BRI)								MultiVOIP User Guide
	FXO Interface: Parameter Definitions (cont’d)
	Field Name		Values				Description
	FXO Disconnect On (cont’d)
	Disconnect		1st tone pair				These are DTMF tone pairs.
	Tone Sequence	+					Values for first tone pair are:
			2nd tone pair
							*, #, 0, 1-9, and A-D.
							Values for second tone pair are:
							none, 0, 1-9, A-D, *, and #.
							The tone pairs 1-9, 0, *, and # are
							the standard DTMF pairs found on
							phone sets. The tone pairs A-D are
							“extended DTMF” tones, which
							are used for various PBX
							functions.
					DTMF Tone Pairs						Low Tones
				1		2		3		A
											697Hz
				4		5		6		B	770Hz
				7		8		9		C	852Hz
				*		0		#		D	941Hz
			High Tones	1209Hz		1336Hz		1447Hz	1633Hz
	Silence		One-Way or				Disconnection to be triggered by
	Detection		Two-Way				silence in one direction only or in
							both directions simultaneously.
	Silence Timer in		integer value				Duration of silence required to
	seconds						trigger disconnection.
	Disconnect on		Y/N				Allows call on FXO port to be
	Call Progress						disconnected when a PBX issues a
	Tone						call-progress tone denoting that the
							phone station on the PBX that has
							been involved in the call has been
							hung up.
	Ring Count,		integer value				Number of rings required before
	FXO						the MultiVOIP answers the
							incoming call.

232