Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual Local Configuration Procedure Detailed

MultiVOIP User Guide Technical Configuration (Digital Voips)

Local Configuration Procedure (Detailed)

You can begin the configuration process as a continuation of the MultiVOIP software installation. You can establish your configuration or modify it at any time by launching the MultiVOIP program from the Windows Start menu.

1.Check Power and Cabling. Be sure the MultiVOIP is turned on and connected to the computer via the MultiVOIP’s Command Port (DB9 connector at computer’s COM port; RJ45 connector at MultiVOIP).

You must allow the MultiVOIP to finish booting before you launch the MultiVOIP Configuration Program. The RED boot LED turns itself off when the booting process is completed.

2.Start MultiVOIP Configuration Program. Launch the MultiVOIP program from the Windows Start menu (from the folder location determined during installation).

127