Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 E1 LED Descriptions, MultiVOIP User GuideOverview

MultiVOIP User GuideOverview

E1 LED Descriptions

	MVP3010 Front Panel LED Definitions
LED NAME		DESCRIPTION
Power		Indicates presence of power.
Boot		After power up, the Boot LED will be on for about 10
		seconds while the MVP3010 is booting.
RCV		Receive. Lights when receiving data on Ethernet port.
XMT		Transmit. Lights when transmitting data on Ethernet
		port.
LNK		Link. When lit, VOIP “sees” the hub or network via
		the Ethernet connection.
COL		Collision. Lit when data collisions occur.
T1		T1. Not supported.
E1		E1. When lit, indicates presence of E1 connection.
PRI		PRI. On if E1 line is of ISDN-Primary-Rate type.
ONL		Online. This LED is on when frame synchronization
		has been established on the T1/E1 link.
IC		IC LED is on when Internal Clocking is selected in
		T1/E1 configuration.
LC		Indicates Loss of Carrier.
LS		Indicates Loss of Signal.
Test		For testing purposes only. For testing purposes only.

25