Multi-Tech Systems MVP-3010, MVP-2400, MVP-2410 manual 711 a/u, 218

Technical Configuration (Analog/BRI) MultiVOIP User Guide

Voice/Fax Parameter Definitions (cont’d)

Coder Parameters
Coder	Manual or	Determines whether selection of coder
	Auto-matic	is manual or automatic. When
		Automatic is selected, the local and
		remote voice channels will negotiate
		the voice coder to be used by selecting
		the highest bandwidth coder supported
		by both sides without exceeding the
		Max Bandwidth setting. G.723, G.729,
		or G.711 are negotiated.
Selected	G.711 a/u	Select from a range of coders with
Coder	law 64	specific bandwidths. The higher the bps
	kbps;	rate, the more bandwidth is used. The
	G.726, @	channel that you are calling must have
	16/24/32/4	the same voice coder selected.
	0 kbps;
	G.727, @	Default = G.723.1 @ 6.3 kbps, as
	nine bps	required for H.323. Here 64K of
	rates;	digital voice are compressed to 6.3K,
	G.723.1 @	allowing several simultaneous
	5.3 kbps,	conversations over the same bandwidth
	6.3 kbps;	that would otherwise carry only one.
	G.729,	To make selections from the Selected
	8kbps;
	Net Coder	Coder drop-down list, the Manual
	@	option must be enabled.
	6.4, 7.2, 8,
	8.8, 9.6
	kbps
Max	11 – 128	This drop-down list enables you to
bandwidth	kbps	select the maximum bandwidth allowed
(coder)		for this channel. The Max Bandwidth
		drop-down list is enabled only if the
		Coder is set to Automatic.
		If coder is to be selected automatically
		(“Auto” setting), then enter a value for
		maximum bandwidth.

218