Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Call States/Reasons MultiVOIP User Guide, 552

Call States/Reasons MultiVOIP User Guide

Call Reasons sent to Embedded Gatekeeper Software with respect to a Call State.

No	State	Description
1	Undefined	No reason.
2	Resource Unavailable	The call was rejected because of a lack of
		Gatekeeper resources.
3	Invalid Endpoint	The ARQ/DRQ was rejected because no
		valid endpoint was identified.
4	Route Call To GK	The destination ARQ was rejected because
		no Setup message preceded it.
5	Lines Busy	The call cannot be completed because Line
		Hunting failed.
6	Destination Out Of	The call cannot be completed because the
	Service	destination cannot be reached.
7	Destination Busy	The call cannot be completed because
		destination is busy.
8	No Answer at	The call cannot be completed because the
	Destination	user at the destination did not answer in the
		given time.
9	Destination Rejected	The call cannot be completed because the
	the Call	party at the destination rejected the call.
10	Origin Disconnected	A connected call was disconnected because
		of the origin. The reason for state
		Disconnected.
11	Destination	A connected call was disconnected because
	Disconnected	of the destination. The reason for state
		Disconnected.
12	New Admission from	The reason for address resolution because
	Origin	of a new admission.
13	New Setup from	The reason for address resolution because
	Origin	of a new Setup.
14	Origin Setup	The reason for wait offering when the Setup
		is not the first message in call. (An ARQ
		was received.)
15	Destination Info In	An LCF arrived with no CallSignal Address
	LRQ	but with a new destinationInfo alias. The
		Gatekeeper sent an Address Resolution state
		with this reason in order to translate the new
		found alias to a valid IP address.

552