Multi-Tech Systems MVP-2400 manual MultiVOIP User Guide Technical Configuration Analog/BRI, 249

MultiVOIP User Guide Technical Configuration (Analog/BRI)

The Custom Tone-Pair Settings fields are described in the table below.

Custom Tone-Pair Settings Definitions

Field Name	Values	Description
Tone Pair	dial tone,	Identifies the type of telephony
	busy tone,	signaling tone for which frequencies
	ring tone,	are being specified.
	‘unobtainable’
	tone,
	survivability tone,
	re-order tone
TONE PAIR	VALUES	About Defaults: US telephony
		values are used as defaults on this
		screen. However, since this dialog
		box is provided to allow custom
		tone-pair settings, default values are
		essentially irrelevant.
Frequency 1	frequency in Hertz	Frequency of lower tone of pair.
		This outbound tone pair enters the
		MultiVOIP at the input port.
Frequency 2	frequency in Hertz	Frequency of higher tone of pair.
		This outbound tone pair enters the
		MultiVOIP at the input port.
Gain 1	gain in dB	Amplification factor of lower
	+3dB to –31dB	frequency of pair. This figure
		describes amplification that the
	and “mute” setting
		MultiVOIP applies to outbound
		tones entering the MultiVOIP at
		the input port. Default = -16dB
Gain 2	gain in dB	Amplification factor of higher
	+3dB to –31dB	frequency of pair. This figure
	and “mute” setting	describes amplification that the
		MultiVOIP applies to outbound
		tones entering the MultiVOIP at
		the input port. Default = -16dB

249