Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Analog Phonebook MultiVOIP User Guide, 372

Analog Phonebook MultiVOIP User Guide

Phonebooks for Series II analog MultiVOIP units (MVP130, MVP210, MVP210G, MVP410, MVP410G, MVP810, and MVP810G) and BRI MultiVOIP units (MVP410ST/810ST) are, in principle, configured the same as phonebooks for digital MultiVOIP products that would operate in the same environment (under either North American or European telephony standards, T1 or E1).

Therefore, if you are operating an analog MultiVOIP unit in a North American telephony environment, you will find useful phonebook instructions and examples in Chapter 7: T1 Phonebook Configuration. If you are operating an analog MultiVOIP unit in a European telephony environment, you will find useful phonebook instructions and examples in Chapter 8: E1 Phonebook Configuration.

Most of the examples in Chapters 7 and 8 describe systems containing both digital and analog MultiVOIP units.

You will also find useful information in Chapter 2: Quick Start Guide. See especially these sections:

Phonebook Starter Configuration Phonebook Tips

Phonebook Example (One Common Situation)

Chapter 2 also contains a “Phonebook Worksheet” section. You may want to print out several worksheet copies. Paper copies can be very helpful in comparing phonebooks at multiple sites at a glance. This will assist you in making the phonebooks clear and consistent and will reduce ‘surfing’ between screens on the configuration program.

372