Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual Local Configuration Procedure Detailed

Technical Configuration (Analog/BRI) MultiVOIP User Guide

When technical configuration is complete, you will need to configure the MultiVOIP’s phonebooks (for all models) and its embedded gatekeeper functionality, if present (for MVP-210G, -410G, and 810G only). This manual has separate chapters describing T1 Phonebook Configuration for North- American-influenced telephony settings and E1 Phonebook Configuration for Euro-influenced telephony settings, as well as a separate Embedded Gatekeeper chapter.

Local Configuration Procedure (Detailed)

You can begin the configuration process as a continuation of the MultiVOIP software installation. You can establish your configuration or modify it at any time by launching the MultiVOIP program from the Windows Start menu.

1.Check Power and Cabling. Be sure the MultiVOIP is turned on and connected to the computer via the MultiVOIP’s Command Port (DB9 connector at computer’s COM port; RJ45 connector at MultiVOIP).

2.Start MultiVOIP Configuration Program. Launch the MultiVOIP program from the Windows Start menu (from the folder location determined during installation).

204