E1 Phonebook Configuration

MultiVOIP User Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

Add/Edit Outbound Phone Book: Field Def’ns (cont’d)

 

 

Field Name

Values

 

Description

 

 

SPP Fields

 

 

 

 

 

 

Use Registrar

Values: Y/N

 

 

 

 

Description: Select this checkbox to use registrar

 

 

 

when voip system is operating in the “Registrar/Client”

 

 

 

SPP mode. In this mode, one voip (the registrar, as set in

 

 

 

Phonebook Configuration screen) has a static IP address

 

 

 

and all other voips (clients) point to the registar’s IP

 

 

 

address as functionally their own. However, if your

 

 

 

voip system overall is operating in “Registrar/Client”

 

 

 

mode but you want to make an exception and use Direct

 

 

 

mode for the destination pattern of this particular

 

 

 

Add/Edit Phonebook entry, leave this checkbox

 

 

 

unselected.

 

 

 

 

Leave this checkbox unselected if your overall voip

 

 

 

system is operating in the “Direct" SPP mode. In this

 

 

 

mode, all voips in system are peers and each has its own

 

 

 

static IP address.

 

 

 

 

 

 

 

 

 

Port Number

Values: numeric

 

 

 

 

Description: When operating in “Registrar/Client”

 

 

 

mode, this is the port by which the gateway receives all

 

 

 

SPP data and control messages from the registrar

 

 

 

gateway. (This ability to receive all data and messages

 

 

 

via one port allows the voip to operate behind a firewall

 

 

 

with only one port open.)

 

 

 

When operating in “Direct” mode, this is the Port by

 

 

 

which peer voips receive data and messages.

 

 

 

 

 

 

 

 

Alternate Phone

numeric

 

Phone number associated with

 

 

Number

 

 

 

alternate IP routing.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MultiVOIP

Values: Y/N

 

 

 

110/120/200/40

Description: Select if any gateways of these

 

 

0/800

model types are included in voip system and are

 

 

 

operating in H.323 mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Advanced

Values: N/A

 

 

 

button

Description: Gives access to secondary screen

 

 

 

 

 

 

where an Alternate IP Route can be specified for

 

 

 

backup or redundancy of signal paths. See

 

 

 

discussion on next page. For SIP & H.323

 

 

 

operation only.

 

 

 

 

 

 

 

 

 

344

Page 344
Image 344
Multi-Tech Systems MVP-3010, MVP-2400, MVP-2410 manual 344